Clock A/C heater control panel illumination

To remove the panel you first need to remove the ski slope as directed in our support pages.

Once the ski slope is removed and the control panel assembly is out remove the three screws that secure it to the surround (top and one each side)

Remove the two screws in ether side of the case that fixes the two halves together.

Press the upper locking tangs inward whilst pulling gently on the rear of the casing to separate the two halves

Now remove the insulator screen from within the front half of the case.

To remove lamps insert a screwdriver into the slotted base of the lamp holders and gently twist anti-clockwise to remove. The lamp layout is shown below.