| 8G8446J |
SEALS KIT for clutch slave cylinder |
| AAU8008 |
CLUTCH DAMPER 3.6Lt : not teves braking system or speed control |
| BAU4781A# |
CLUTCH SLAVE CYLINDER SEAL KIT all 4.0 Lt |
| BHM7127J |
SEALS KIT for master cylinder 5.3ltr |
| C1845/1* |
CONSTANT PINION REAR BEARING |
| C18719* |
TAIL SHAFT BEARING |
| C18739* |
CLUTCH HOUSING OIL SEAL |
| C20491* |
CONSTANT PINION FRONT BEARING |
| C22391* |
GEARBOX BAULK RING |
| C23007* |
GEAR LEVER KNOB |
| C23109/3 |
GEARBOX NEEDLE ROLLER BEARING (232 per box) |
| C23394* |
TAIL SHAFT OIL SEAL |
| C24589 |
SPEEDO CABLE ANGLE DRIVE gearbox end |
| C29801# |
CLUTCH SLAVE CYLINDER 5.3Lt |
| C38573 |
COUNTER SHAFT NEEDLE ROLLER BEARING (58 per box) |
| C44911* |
SPEEDO CABLE 5.3Lt L.H.D. pre H.E. to vin # 2W53506 |
| C44915 |
SPEEDO CABLE 5.3 Lt R.H.D. pre H.E. |
| C46183 |
SPEEDO CABLE ANGLE DRIVE gearbox end |
| CAC3227* |
GEARBOX SPRING CENTRE BUSH |
| CAC8091 |
CLUTCH MASTER CYL.INDER 5.3/3.6 Lt : not teves system |
| CBC9716 |
CLUTCH SLAVE CYLINDER 4.0 Lt from vin # 188248 |
| DAC1036* |
SPEEDO CABLE 5.3Lt R.H.D. from vin # 2W 2833
until transducers were fitted |
| DAC1037* |
SPEEDO CABLE 5.3Lt L.H.D. from chassis # 2W 53507
until transducers fitted |
| DAC4569# |
SPEEDO TRANSDUCER 3.6 & 5.3 to vin # 144262 |
| DBC2632 |
SPEEDO TRANSDUCER from above vin # |
| EAC6023 |
REVERSE LIGHT SWITCH 3.6 Lt |
| EAC7651 |
CLUTCH SLAVE CYLINDER 3.6 4.0Lt : not teves braking system |
| EAC9985 |
CLUTCH COVER ASSY XJS 3.6 |
| EBC2856 |
CLUTCH PLATE 4.0 Lt |
| EBC3115 |
CLUTCH COVER 4.0 Lt |
| EBC4132 |
CLUTCH PLATE XJS 3.6 |
| EBC4132 |
CLUTCH PLATE3.6 Lt |
| GGS002 |
GEARBOX GASKET SET 4 syncro box |
| HB1648 |
CLUTCH PLATE 5.3 Lt |
| HB8806 |
CLUTCH PLATE XJS 3.6 |
| HD3264 |
CLUTCH RELEASE BEARING 3.6 Lt |
| HD3325 |
CLUTCH RELEASE BEARING 5.3 Lt |
| HE2868 |
CLUTCH COVER 5.3 Lt |
| JLM9626 |
CLUTCH RELEASEBEARING 3.6/4.0 Lt |
|
PLEASE NOTE:GEARBOX INTERNALS
ONLY APPLY TO 5.3 Lt pre H.E. |
